APPLICATION OF «HOT» DISSOLUTION OF POLYSTYRENE MODELS IN THE PRODUCTION OF CASTINGS IN SHELL-SHAPED FORMS FROM COMPLEX-MODIFIED CERAMICS
Keywords:
heat-resisiting alloy, ceramic mold, polystyrene, «hot» dissolution, thermo kinetic parameters, porosityAbstract
The results of investigations of ways of intensifying the process of dissolution of casting models from different types of expanded polystyrene by the method of «hot» dissolution are given. The influence of the thermo-temporal conditions of the process for several kinds of solvents is established. Advantages of the proposed method are shown in comparison with investment casting for both the
improvement of surface quality and the reduction of time costs in obtaining complex-shaped castings
References
Shuljak, V.S. (2007). Casting on gasified models. St. Petersburg: Professional [in Russian].
Shinskij, O.I. (1997) Gas-hydrodynamics and casting technologies of iron-carbon and non-ferrous alloys in gasified models. Diss. dokt. tekhn.nauk. Kiev, 481 p.
Shinskij, O.I., Maksjuta, I.I., Nejma, A.V. (2013) Features of the application of soluble cellular polystyrene models for getting complex GTE parts. Metall i lit'e Ukrainy, Vol. 9, pp. 14–18 [in Ukrainian].
Shinskij, O.I., Maksjuta, I.I., Kvasnitskaia, Yu.H., Nejma, A.V. & Mihnian, E.V. (2016) The use of soluble foam polystyrene models for the production of cast parts of gas turbine plants. Lit'e i metallurgija, Vol. 1, pp. 46–52 [in Belarus].
Shinskij, O.I., Maksjuta, I.I., Kvasnitskaia, Yu.H., Mihnian, E.V. & Nejma A.V. (2016) The production of complex profile details by combined method of lost-wax casting and of consumable pattern models. Lit'e i metallurgija, Vol. 3, pp. 31–37 [in Belarus].
Simanovskij, V.M., Maksjuta, I.I., Kvasnitskaia, Yu.H. & Anikin, Yu. F. (2006) Development of a new technological process for obtaining shell ceramic molds for deleted models. Processy lit'ja, Vol. 4, pp. 66–71 [in Ukrainian].
Shinskij, O.I., Maksjuta, I.I., Nejma, A.V., Kvasnitskaia, Yu.H. & Mihnian, E.V. (2015) The technological problems of getting GTE parts in shell molds with dissolved models. Litejnoe proizvodstvo, Vol. 5, pp. 19–25 [in Russian].
Kvon, Sv.S., Kulikov, V.Yu., Isagulov, A.Z., Arinova, S.K., Kovaleva, T.V. (2017) Examination of polystyrene foam in the gasifiable pattern casting. Litejnoe proizvodstvo, Vol. 7, pp. 18–20 [in Russian].
Maksiuta, І.І., Kvasnytska, Yu.H., Verhovliuk, A.M., Mihnian, O.V. & Levchenko, Yu.N. (2017) Interaction of components in th,e system «oxide-modifiers» in corundum molding ceramics for details with an oriented structure. Metall i lit'e Ukrainy, Vol. 8–10, pp. 31–37. [in Ukrainian].
Shinski,j O.I., Maksjuta, I.I., Kvasnitskaia, Yu.H., Nejma, A.V. & Mihnian, E.V. (2014) Dissolution kinetics of polystyrene models for the method of casting in shell molds. Processy lit'ja, Vol. 4, pp. 40–48 [in Ukrainian].
Alekseev, G.N. (1980) General heat engineering. Moscow: Vysshaja shkola [in Russian].
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 О. Й. ШИНСЬКИЙ, І. І. МАКСЮТА, Ю. Г. КВАСНИЦЬКА, О. В. НЕЙМА, О. В. МИХНЯН
This work is licensed under a Creative Commons Attribution 4.0 International License.
