ЕФЕКТИВНІСТЬ РЕВЕРСИВНОГО ПЕРЕМІШУВАННЯ СПЛАВІВ У РІДКОМУ СТАНІ

В. Ю.  Шейгам; Н. П.  Ісайчева; А. Г.  Пригунова; Л. К.  Шеневідько

EFFECTIVENESS OF REVERSE MIXTURE OF ALLOYS IN A LIGUID STATE

Authors

V. Yu. Sheygam Physico-technological Institute of Metals and Alloys NAS of Ukraine, Kyiv
N. P. Isaycheva Physico-technological Institute of Metals and Alloys NAS of Ukraine, Kyiv
A. G. Prigunova Physico-technological Institute of Metals and Alloys NAS of Ukraine, Kyiv
L. K. Shenevidko Physico-technological Institute of Metals and Alloys NAS of Ukraine, Kyiv

Keywords:

reversible stirring, physical modeling

Abstract

Results of study on improvement of mechanical stirring using reversible regime are presented in this paper. On the base of study used method of physical modeling optimal parameters of stirring that provides rise of homogeneity and improving of structure and properties of casted product were determined.

Author Biographies

V. Yu. Sheygam, Physico-technological Institute of Metals and Alloys NAS of Ukraine, Kyiv

Researcher
N. P. Isaycheva, Physico-technological Institute of Metals and Alloys NAS of Ukraine, Kyiv

Chief Technologist
A. G. Prigunova, Physico-technological Institute of Metals and Alloys NAS of Ukraine, Kyiv

Doctor of Engineering Sciences, Head of Department
L. K. Shenevidko, Physico-technological Institute of Metals and Alloys NAS of Ukraine, Kyiv

Researcher

References

Institut gidromechaniki Nacionalnoy Akademii nauk Ukrainy. Otdel vichrevych dvizheniy. URL: www.hydromech.kiev.ua/rus/ovd/nauch dost.html [in Russian].

Dsholio I. Ottino. Mixing of Liguids. URL: www.bestrefesat.ru/referat.4948.html [in Russian].

Rashkоvich, L.N. (1996) How crystals grow in solution. Sorosovskiy obrazovatelny zhurnal : MGU im. M.D.Lomonosova. Moskva, no. 3, pp.18−20 [in Russian].

Zhuk, V.I. Analysis of methods for mixing a liquid core of the hardening casting. V kn. «Visnyk Priazovskogo derzhavnogo technicheskogo universitetu. Zbirnyk naukovych prats», Seriya «Technichni nauki». Vyp. 20, pp.149−153 [in Russian].

Borisov, G.P., Sheigam, V.Y., Isaicheva, N.P., Semenchenko, A.I., Neduzhiy, A.N., Vernidub, A.G. Optimization of the mixing process of two-phase aluminum alloys. VII Mezhdunarodnaja nauchno practicheskaja konferentsiya «Litie 2011», Zaporozhje, pp. 42−43 [in Russian].

Downloads

PDF (Ukrainian)

Published

08-12-2018

Issue

Casting processes №6 (132) 2018

Section

HYDRODYNAMICS OF CASTING PROCESSES

License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

EFFECTIVENESS OF REVERSE MIXTURE OF ALLOYS IN A LIGUID STATE. (2018). Casting Processes, 132(6), 8-15. https://plit-periodical.org.ua/index.php/plit/article/view/154

Download Citation

Most read articles by the same author(s)

A. G. Prigunova, A. M. Neduzhyi, Structural aluminum alloys of the Al−Cu−Mg AND Al−Zn−Mg−Сu systems in aircraft construction. Review , Casting processes: Casting processes №1 (151) 2023
V. I. Bielik, A. G. Prigunova, V. Yu. Shaіgam, A. G. Vernydub, PHYSICO-CHEMICAL METHODS OF INCREASING THE CRACK RESISTANCE OF ALLOY AM4.5Kd (VAL10). NOTICE 1: EXPERIENCE OF USING AN RING SAMPLE: Procesi littâ, 2023, Vol 2 (152), 24-32 , Casting processes: Casting processes №2 (152) 2023
A.G. Prigunova, V. I. Bielik, L. K. Shenevidko, M. V. Kosheliev, Investigation of Phase Transformations During Crystallization of Aluminum Alloys by HardeningMicrostructural Analysis: Processy litʹâ, 2020, Tom 141, №3, p.27-41 , Casting processes: Casting processes №3 (141) 2020
V. P. Holovachenko, A. G. Prygunova, L. K. Shenevidko, N. P. Isaicheva, M. V. Koshelev, A. G. Vernydub, Features of Thyxophorming of High-Strength Aluminum Alloy VAL10 in Conditions of Pulse Pressing , Casting processes: Casting processes №2 (148) 2022
A. G. Prigunova, G. M. Zelinskaya*, M. V. Koshelev, FEATURES OF CRYSTALLIZATION AND EVOLUTION OF THE STRUCTURE OF THE IRON-CONTAINING PHASES OF AK5M2 ALLOY PROCESSING BY PULSED ELECTRIC CURRENT IN LIQUID STATE: Processy litʹâ, 2019, Tom 136, №4, p.20-34 , Casting processes: Casting processes №4 (136) 2019
V. P. Golovachenko, L. K. Shenevidko, N. P. Isaicheva, V. M. Duka, T. G. Tsir, A. G. Vernidub, Features of Rotary Processing of Aluminum Melts in the Ladle in the Rheo-Thixocasting Processes: Processy litʹâ, 2020, Tom 142, №4, p.3-12 , Casting processes: Casting processes №4 (142) 2020
A. G. Prigunova, The Role of Manganese and Liquid-Phase Electric Treatment on the Formation of Iron-Containing Phases in Predeutectic Alloys of the Al-Si-−Fe-Mn System: Processy litʹâ, 2020, Tom 142, №4, p.13-25 , Casting processes: Casting processes №4 (142) 2020
V. P. Golovachenko, N. P. Isaicheva, A. R. Vernydub, V. M. Duka, T. G. Tsir, L. K. Shenevidko, Environmentally Friendly Method to Finish Refining Aluminum Alloys: Processy litʹâ, 2019, Tom 137, №5, p.11-16 , Casting processes: Casting processes №5 2019 (137)
V. P. Golovachenko, T. G. Tsir, V. M. Duka, A. G. Vernidub, N. P. Isaycheva, Advantages of Casting Partially Crystallized Aluminum Alloys (Reocasting): Processy litʹâ, 2019, Tom 135, №3, p.33-39 , Casting processes: Casting processes №3 (135) 2019

EFFECTIVENESS OF REVERSE MIXTURE OF ALLOYS IN A LIGUID STATE

Authors

Keywords:

Abstract

Author Biographies

References

Downloads

Published

Issue

Section

License

How to Cite

Similar Articles

Most read articles by the same author(s)

Language

Make a Submission

googlescholar

Latest publications

Information