PRODUCTION PROCESS STUDY POLYSTYRENE FOAM MODELS WITH MACRO-REINFORCING ELEMENTS

Authors

  • В. А. Слюсарев Физико-технологический институт металлов и сплавов НАН Украины, Киев
  • П. Б. Калюжный Физико-технологический институт металлов и сплавов НАН Украины, Киев
  • И. А. Шалевская Физико-технологический институт металлов и сплавов НАН Украины, Киев
  • А. В. Шалевский Физико-технологический институт металлов и сплавов НАН Украины, Киев

Keywords:

expanded polystyrene model, reinforcing phase, die-mold, autoclave, sintering, density

Abstract

In the article the scheme and features of process of manufacturing of foam polystyrene models with macro-reinforcing phase by an autoclave method are given. Investigation of the sintering process of reinforced models in an autoclave showed that with increasing thickness and weight of the reinforcement, the sintering time of the model increases.

Author Biographies

  • В. А. Слюсарев, Физико-технологический институт металлов и сплавов НАН Украины, Киев

    аспирант

  • П. Б. Калюжный, Физико-технологический институт металлов и сплавов НАН Украины, Киев

    канд. техн. наук, ст. науч. сотр.

  • И. А. Шалевская, Физико-технологический институт металлов и сплавов НАН Украины, Киев

    канд. техн. наук, доцент, ст. науч.сотр.

  • А. В. Шалевский, Физико-технологический институт металлов и сплавов НАН Украины, Киев

    гл. технолог

References

Kaliuzhnyi, P. B., Sliusarev, V. A., Kalashnyk, D. O. (2017). Armuvannia vylyvkiv za tekhnolohiieiu lyttia za modeliamy, scho hazyfikuiut’sia [Casting reinforcement by lost-foam casting technology]. Metaloznavstvo ta obrobka metaliv,Vol. 4, 48–53 [in Ukrainian].

Shuljak ,V. S. (2007). Lit’e po gazificiruemym modeljam [Lost-foam casting]. St. Petersburg: NPO «Professional» [in Russian].

Stepanov, Ju. A. (Ed.). (1976). Lit’e po gazificiruemym modeljam. Osnovy teorii i tehnologii [ Lost-foam casting. Fundamentals of theory and technology]. Moscow: Mashistroenie [in Russian].

Pacyniak, T., Buczkowska, K., Kaczorowski, R. (2011). Influence of time and pressure of forming a pattern on mechanical properties. Archives of Foundry Engineering, Vol 11 (3), 151–156. [in Russian].

Shinskij, O. I., Kiorean, H., Shinskij, I. O. (1996). Issledovanie termovremennyh parametrov poluchenija izdelij iz penopolistirola dlja lit’ja po gazificiruemym modeljam [Investigation of the thermo-current parameters for the obtaining of products from expanded polystyrene for lost-foam casting]. Processy lit’ja, Vol. 2, 82–90 [in Russian].

Buczkowska, K., Pacyniak, T. (2015). The aging time effects of the pre-expanded polystyrene on the patterns mechanical properties. Archives of Foundry Engineering, Vol. 15 (1) pp. 131–137. [in Russian].

Smeljakov, N.N. (1958). Armirovannye otlivki [Reinforced castings]. Moscow: Mashgiz, p.166 [in Russian].

Downloads

Published

01-08-2018

Issue

Casting processes №4 (130) 2018

Section

PROBLEMS OF MOULD TECHOLOGY

License

Copyright (c) 2018 В. А. Слюсарев, П. Б. Калюжный, И. А. Шалевская, А. В. Шалевский

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

PRODUCTION PROCESS STUDY POLYSTYRENE FOAM MODELS WITH MACRO-REINFORCING ELEMENTS. (2018). Casting Processes, 130(4), 62-67. https://plit-periodical.org.ua/index.php/plit/article/view/176

Similar Articles

1-10 of 184

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)